Filter
Top Products
English -
50
long. For the related setting, refer to 7.11 I would like to
capture images of Chapter 7 Descriptions of major
functions.
9
The images
outputted from
PS760 are too bright,
dark or vague
Press [AUTO TUNE] to automatically adjust to the optimal
brightness and focal length.
10
Unable to record
images
1. Check to see if the stored data have reached the
maximum size of the USB disk (priority) or internal
memory.
2. Please confirm the rotation angle. You may not able to
record when the image is rotated by 90°/270°.
11
The operating steps in
the manual are not
applicable to the
machine
The operating steps in the manual may be not applicable
to the machine due to improvement in functions.Check to
see if the Firmware version of your machine is
up-to-date.
1 Please go to Lumens official website to check whether
the latest version is available for update.
http://www.lumens.com.tw
2 The steps to check the FW version are as below:
2.1 Press [MENU] on the remote control or control
panel to enter the setting menu.
2.2 Press [] or [] to select [Advanced] menu.
If you are not sure whether it is the latest version, please
consult your dealer for advice.
http://www.lumens.com.tw/tw/support-cf.asp
12
Unable to login to the
network control page
If DHCP is enabled, the IP address may not be updated.
Please follow the steps below:
1 Press [MENU] on the remote control or control panel
to enter the setting menu.
2 Press [] or [] to the [Advance] menu.
3 Press [] or [] to the [Ethernet].
4 Press [ENTER] to open the Ethernet OSD menu.
5 Press [] to find [DHCP].
6 Press [ENTER] to modify it.
7 Press [] or [] to select [On].
8 Press [MENU] to exit the Ethernet OSD menu.
9 Repeat steps 3 ~ 4 and check IP address.
Master: PVC039 Slave: PVD035
Firmware
version