Filter
Top Products
Film Loading
1. While pushing the Back Cover
Lock Release Button
8
downward,
press the Back Cover Opening But-
ton
@;:,
and the Back Cover will
open.
2. While squeezing in on both sides
3. Align the right-hand side of this
of the Release Latch
CQ,
pull the Roll
empty spool with the lower Spool
Film Insert
out
of the camera body. At
Stud
‘8
(convex). Slide the spool into
that time, move the empty spool in
position making sure that the
left-
the upper part down to the lower
side of the spool is properly held
by
spool
compartment
the Spool Clip.
When you load film for the first
time, remove and discard the
protective paper cover which is
attached to the film rails in the
roll
film holder.