Filter
Top Products
Press this key on the remote
control
The screen displays Explanation
8
4. Set „LNC voltage V“
5. Store the settings
6. Return to the TV picture
OK
P
+
+
-
AV
--/-
-
P
123
456
789
0
A
B
TV
?
MENU
LNC pwr supply
696+S02D-GB
On
On
LNC voltage H
LNC voltage V
?
MENU
return Help
TV
TV picture
store ?
OK
OK
P
+
+
-
AV
--/-
-
P
123
456
789
0
A
B
TV
?
MENU
LNC pwr supply
696+S02E-GB
On
On
LNC voltage H
LNC voltage V
?
MENU
return Help
TV
TV picture
The supply voltage for the SAT aerial can be set to Off
or to a voltage in the range of 12 V to 19 V. When the
correct voltage is set, the picture from the SAT station
being received on this program position appears
behind the menu display.
Whenever the voltage setting is changed, a red box
appears at the bottom right of the screen. When you
have set the correct voltage, press the key to
store it.
One of these two voltages can subsequently be assigned
to each SAT program position. To do this, call the station
table, open the menu „Channel“ with the key
and then, in the submenu „Aerial control“, select the
LNC supply voltage H or V with the keys . See
section 4 of these instructions.
+
-
OK
Pressing the key stores the values you have set.
OK
2. LNC Power Supply
Setting the LNC voltages
+
-
OK
TV