Filter
Top Products
prolonged periods of time. For this reason it is necessary to
switch on the mecablitz for approx. 10 minutes every 3
months. The batteries must supply sufficient power for flash
readiness to be indicated within 1 minute after the meca-
blitz was switched on.
Metz does not accept any liability for faulty functions
or damage to the mecablitz caused by the use of
accessories from other manufacturers!
9. Technical data
The flash unit can be updated by the METZ customer
service department.
Zoom reflector positions:
28 mm - 35 mm - 50 mm - 85
mm
T
ilting range and locking positions of flash head:
vertically 30° - 45° - 60° - 90°
Flash duration:
1/500 s - 1/30,000 s
Colour temperature: approx. 5500 K
Film speed: ISO 25 to ISO 800
Synchronisation:
Low-voltage ignition
Number of flashes
(at full light output):
approx. 160 with NiCad batteries (600 mAh)
approx. 450 with
high-capacity alkaline manganese batteries
approx. 320 with NiMH
batteries (1600 mAh)
Recycling time
(at full light output):
approx. 3 s with NiCad batteries
approx. 3 s with
high-capacity alkaline manganese batteries
Dimensions
(w x h x d): 73 x 110 x 87 mm
W
eight: 205 g without batteries
Included:
mecablitz, Operating Instructions
☞
87
ķ
Errors excepted. Subject to changes !
707 47 0178.A2 36AF-4-CNOPS 05.06.2008 8:29 Uhr Seite 87