Filter
Top Products
AGE! There are no components inside the flashgun that
can be repaired by a layman.
•
When taking a series of flash shots at full light output and
fast recycling times as provided by NiCad battery opera-
tion, make sure to observe an interval of at least 10 mi-
nutes after 15 flashes, otherwise the flash unit will be
overloaded.
•
The mecablitz may only be used in combination with a
camera-integrated flash unit if the latter can completely
be folded out!
•
Quick changes in temperature may cause condensation.
Therefore give the flashgun time to acclimatize!
2. Supported dedicated functions
2.1 mecablitz 36 AF-4 C
• Flash ready indication in camera viewfinder
• Automatic flash sync speed
• TTL flash control
• E-TTL flash control
∆ Manual TTL-flash exposure correction
∆ Flash exposure storage FE
x AF measuring beam control
• Programmed auto flash mode
• Wake-up function for flash unit
∆ = Dedicated function is performed by the camera or must be
set on the camera.
x = Some cameras only support the AF illuminator integrated
in the camera.
2.2 mecablitz 36 AF-4 N
• Flash ready indication in camera viewfinder
• Automatic flash sync speed
• TTL flash control
• i-TTL flash control
• Automatic TTL flash exposure correction
∆ Manual TTL-flash exposure correction
71
ķ
707 47 0178.A2 36AF-4-CNOPS 05.06.2008 8:29 Uhr Seite 71