Filter
Top Products
9
OK
TV
Press this key on the remote
control....
The screen displays Explanation
4. Store the setting and return
to TV picture
TV picture
Prog Logo
Chan./Freq
.
Signal
▲▼
>> weitere Einstellungen
Std, Pict., Sound
696+03A-GB
LOGIC
ARD
ZDF
SAT 1
00
06
34
40
Video Rec.1
Aerial
Aerial
Aerial
0
1
2
3
4
5
6
7
8
9
Std channel 06 ARD
Spec. channel
Fine tuning
SAT-Frequ.
Aerial control
TV station table
?
MENU
return Help
TV
picture
Prog Logo
Chan./Freq
.
Signal
▲▼
>> weitere Einstellungen
Std, Pict., Sound
696+03A-GB
LOGIC
ARD
ZDF
SAT 1
00
06
34
40
Video Rec.1
Aerial
Aerial
Aerial
0
1
2
3
4
5
6
7
8
9
Std channel 06 ARD
Spec. channel
Fine tuning
SAT-Frequ.
Aerial control
TV station table
?
MENU
return Help
TV
picture
Prog Logo Signal
▲▼
>> weitere Einstellungen
Std, Pict., Sound
696+03A-S-GB
LOGIC
ARD
ZDF
SAT 1
00
06
34
40
Video Rec.1
Aerial
Aerial
Aerial
0
1
2
3
4
5
6
7
8
9
Std channel 06 ARD
Spec. channel
Fine tuning
SAT-Frequ.
Aerial control
TV station table
?
MENU
return Help
TV
picture
store ?
OK
Chan./Freq
.
3. Presetting TV stations
Direct channel entry/
station search
When the TV set leaves the factory, there are no stations programmed. Depending on where you live, the stations have different channel
numbers. There are three possible ways of programming the stations:
a) Direct channel input b) Station search c) the Autostore function
1. Call the station table and
channel type survey
2. Select the type of channel
(e.g. standard channel)
3. Enter the channel number
(Example: Standard channel
06) or start station search
With direct channel entry it is necessary to know the
type of channel and the channel number.
If type and number of channel are not known, you can
scan through the entire reception range with the
search function to locate stations.
The station table lists all the preset stations.
These stations can be changed at any time.
The cursor always highlights the type of channel
currently preset in the given programme position.
For the search function it is advisable to switch to a
vacant programme position.
Two types of channels are offered in the box with the
yellow frame. Select the desired channel type with the
related coloured keys.
Once the channel type has been selected, a channel
number is displayed for the highlighted item if a station
is stored in this programme position. If no station is
stored, two dashes are displayed.
„SAT freq.“ and „Aerial control“ can be selected only if
a SAT upgrade kit is installed in the TV set.
With direct channel entry, the station table is briefly
faded out when the channel number is entered, and
the selected station is displayed.
The station search proceeds from the displayed
channel number in a forward sequence with the
key, and in a reverse sequence with the key.
Search proceeds from the lower channel area
upwards or downwards when two lines are displayed.
The search stops when a station has been found.
Proceed as described in step 4 if the located station is
to be stored.
Press the or key if the located station is not to be
stored so that the search can be continued.
Complete fine tuning if station reception is not clear
(see Section 3.2).
-
+
-
+
6
0
+
-
or
yellow
blue
white