Filter
Top Products
Bowl
Tie Down Hook
Aluminium or .....
Carbon Fibre Tubes
Upper Leg Lock Assembly
Transport Clips
Mid Level
Spreader Mount
Lower Leg
Lock Adjuster
FEATURES AND CONTROLS
Two-stage tripod
Single-stage tripod
TECHNICAL DATA
INTRODUCTION
ACCESSORIES & COMPONENTS
SERVICE, SALES & SUPPORT
WARRANTY
WEBSITE www.millertripods.com
Please refer to warranty card for complete details
Miller Authorised Service Agents must carry out all service and repair work
on Sprinter tripods. Failure to observe this requirement may void warranty. It
is advisable to notify Miller or a Miller Authorised Service Agent if a change
of performance is observed as a result of dropping or rough usage. For in-
formation regarding sales and service of Miller products, or for your nearest
Miller representative, please contact us via our website or at the following:
Cat # Description
#475 Detachable Rubber Feet (set of 3)
#990 Mid Level Spreader
#470 Ground Spreader
P5380 Carry Handle Assembly
P6434 Upper Leg Lock Lever
P6436 Lower Leg Lock Lever
P5330 Transport Clip
P6579 5mm Hex Key
MILLER CAMERA SUPPORT EQUIPMENT
30 Hotham Parade, Artarmon, Sydney
NSW 2064 Australia
Tel: +61 2 9439 6377
Fax: +61 2 9438 2819
Email: sales@miller.com.au
MILLER FLUID HEADS (Europe) LTD.
Unit A2, Ford Lane Industrial Estate
Ford Lane, Ford
West Sussex, BN18 0DF United Kingdom
Tel: +44 (0)1243 555 255
Fax:+44 (0)1243 555 001
Email: sales@millertripods-europe.com
MILLER CAMERA SUPPORT LLC (USA)
218 Little Falls Road, Cedar Grove,
New Jersey 07009-1231 USA
Tel: (973) 857 8300
Fax: (973) 857 8188
Email: sales@millertripods.us
MILLER TRIPODS Canada
1055 Granville Street
Vancouver BC V6Z1L4, Canada
Tel: (604) 685 4654
Fax: (604) 685 5648
Email: sales@millercanada.com
O P E R A T O R ’ S M A N U A L
#1589 Sprinter II Single Stage Alloy Tripod
#1584 Sprinter II Single Stage Carbon Tripod
#1580 Sprinter II 2-Stage Alloy Tripod
#1576 Sprinter II 2-Stage Carbon Tripod
Cat# #1589 #1584 #1580 #1576
Tube Conguration 1 Stage 1 Stage 2 Stage 2 Stage
Tube Material Alloy Carbon Fibre Alloy Carbon Fibre
Maximum Load 45kg 45kg 45kg 45kg
Weight 3.0kg 2.5kg 3.5kg 2.9kg
Maximum Height- mm (in)
Mid Level Spreader 1435 (56.5) 1435 (56.5) 1530 (60.3) 1530 (60.3)
Ground Spreader 1430 (56.3) 1430 (56.3) 1565 (61.7) 1565 (61.7)
Minimum Height- mm (in)
Mid Level Spreader 670 (26.5) 670 (26.5) 440 (17.5) 440 (17.5)
Ground Spreader 635 (25.0) 635 (25.0) 415 (16.5) 415 (16.5)
Transport Length- mm (in) 850 (33.50) 850 (33.50) 705 (27.8) 705 (27.8)
Welcome to the Operating Manual for the Sprinter II camera support
tripods from Miller. Sprinter II tripods feature Miller’s revolutionary Sprint-
Loks (Patented.) leg clamping system, and are designed to be used in
conjunction with 100mm ball leveling uid heads to support lightweight
portable video cameras in a professional environment.
Sprinter II tripods are available as Single-Stage or 2-Stage extension
tripods, supplied with your choice of high-strength, ultra-light carbon ber
or durable, anodised aluminum leg tubing.
Sprinter II are professional tripods designed for continuous use, and
combine light weight and ease of set-up with rapid, stable and durable
performance. They are constructed from the highest quality polymers and
corrosion-resistant die cast and machined alloy components to offer high
impact resistance and long-term durability under extreme location condi-
tions and temperatures ranging from –40°C to +65°C.
The Sprinter II tripod range is available in a choice over 20 systems with
Miller’s Arrow and DS range of uid heads and Mid Level or Ground
Spreaders. These systems deliver the ultimate in rugged, rapid deploy-
ment camera support for ENG crews, freelance camera operators, as well
as corporate and educational users.
Aluminum or Carbon Fibre tubes
Upper Leg Lock Assembly
Sprint Lok
D6582-3 04/06
Fig 1. Fig 2.
Upper Leg
Lock Adjuster
Sprint Lok
Upper Lever
Sprint Lok
Lower Lever
Carry Handle
Rubber Foot