Filter
Top Products
Introduction
2
Fig 1
The DS5 fluid pan and tilt head
Thank you for purchasing the Miller DS5 fluid head for use with
professional tripods and portable video camcorders. The DS5 is a true
fluid pan and tilt head with professional features including 75mm ball
levelling, adjustable drag control, quick release camera plate, bubble level
and adjustable/detachable pan handles.
The DS5 is intended for use by professionals in the video production industry,
and is therefore built to withstand the rigours of continuous field operation.
The DS5 fluid head is supplied with a single Pan Handle and clamp, fitted to
the right side of the head. The DS5 #686 handle is 350mm in length (14”)
with a 12mm (.5”) shaft. A second Pan Handle and Clamp can also be fitted.
Before operating please read the following operating instructions. Do not
omit any step. N.B. The safe operation of this piece of professional
equipment is the responsibility of the operator.
1.1 Unscrew CLAMP NUT from threaded stud. (See Fig 1)
1.2 Place DS5 head in your tripod bowl (75mm) and re-fit CLAMP NUT. Do
not tighten CLAMP NUT.
1.3 Level the fluid head by centring the bubble in the BUBBLE LEVEL.
Then tighten the CLAMP NUT.
1.4 Note: If adjusting the level with your camera mounted, first ensure
the camera is securely held before loosening CLAMP NUT.
Handle Mounting
Operating Instructions
1. Install and Level the Head