Miller Camera Support 1630 Camcorder Accessories User Manual


 
Mid Position
Note: This refers to the mid leg
angle position, not necessarily the
height of the tripod.
The SOLO tripod has three leg angle
positions. The middle leg angle position
(Fig.7) is self-engaging after closing leg
from fully spread position (Fig.6). The
mid position is chosen for optimum
stability in the 50-130cm tripod height
range, but is not recommended if the
tripod is being used in a crowded
situation, due to the wide
diameter, or footprint
spread, of the extended
tripod.
1 Remove camera from fluid head.
2 Close the tripod legs so all are pointing
straight down and disengage all
concentric locks.
3 Holding the bowl, lower tripod to its
shortest length and re-engage
concentric locks.
4 Close legs together fully (Fig. 1) fit leg strap and return tripod to
carry bag if finished shooting.
5
Fig 6 Spread Position
Tripod Setup (cont) Tripod Pull Down
Fig 5 Leg angle adjuster
raised
Fig 7 Middle leg
angle position