Nikon AF-S VR Camera Lens User Manual


 
23
En
To facilitate attachment or removal of the hood, hold it by its base (around the lens
hood attachment index) rather than its outer edge.
To store the lens hood, attach it in the reverse position.
Detaching the hood
While holding the base of the hood (near the lens hood attachment index) rather than
its outer edge, turn it counterclockwise to detach.
9. Flash pictures using cameras with a built-in flash
To prevent vignetting, do not use a lens hood 1.
10. Recommended focusing screens
Various interchangeable focusing screens are available for certain Nikon SLR cameras
to suit any picture-taking situation. The ones recommended for use with this lens are:
: Excellent focusing
k: Acceptable focusing
Slight vignetting or moiré patterns appear in the viewfinder, but not on the film.
: Not available.
( ): Indicates degree of exposure compensation needed (Center-Weighted metering
only). For F6 cameras, compensate by selecting “Other screen” in Custom
Setting “b6: Screen comp.” and setting the EV level to -2.0 to +2.0 in 0.5 EV
steps. When using screens other than type B or E, “Other screen” must be
selected even when the required compensation value is “0” (no compensation
required). For F5 cameras, compensate using Custom Setting #18 on the camera
body. For F4-Series cameras, compensate using the Exposure Compensation Dial
for the focusing screen.
See instruction manual of the camera body for more details.
Blank box means not applicable. Since type M screen can be used for both macro-
photography at a 1:1 magnification ratio and for photomicrography, it has different
applications than other screens.
ABCE
EC-B
F
G1
G3 G4 J K L M P U
EC-E G2
F6
F5+DP-30
F5+DA-30
F4+DP-20
F4+DA-20
Screen
Camera