Nikon 13305 Digital Camera User Manual


 
319
n
Shooting (P, S, A, M)
Shutter-release disabled:
Non-CPU lens is attached: rotate camera mode dial to A or M (0 288).
Mode dial rotated to S after shutter speed of A selected in mode M: choose new shutter
speed (0 76).
Full range of shutter speeds not available: Flash in use.
Flash sync speed can be selected using
Custom Setting e1 (Flash sync speed); when using compatible flash units, choose 1/250 s
(Auto FP) or 1/200 s (Auto FP) for full range of shutter speeds (0 234).
Colors are unnatural:
Adjust white balance to match light source (0 115).
Adjust Set Picture Control settings (0 129).
Can not measure white balance: Subject is too dark or too bright (0 123).
Image can not be selected as source for preset white balance: Image was not created with D610 (0 124).
White balance bracketing unavailable:
NEF (RAW) or NEF+JPEG image quality option selected for image quality (0 93).
Multiple exposure mode is in effect (0 163).
Effects of Picture Control differ from image to image: A (auto) is selected for sharpening, contrast, or
saturation.
For consistent results over a series of photos, choose another setting (0 132).
Metering can not be changed: Autoexposure lock or movie live view is in effect (0 57, 110).
Exposure compensation can not be used: Choose mode P, S, or A (0 75, 76, 77).
Noise (reddish areas or other artifacts) appears in long time-exposures: Enable long exposure noise
reduction (0 218).