Filter
Top Products
13
X
Insert the Battery
1 Turn the camera off.
2 Open the battery-chamber cover.
Unlatch (q) and open (w) the battery-chamber cover.
3 Insert the battery.
Insert the battery in the orientation
shown (e), using the battery to keep
the orange battery latch pressed to
one side.
The latch locks the battery
in place when the battery is fully
inserted.
4 Close the battery-chamber cover.
A Inserting and Removing Batteries
Always turn the camera off before inserting or removing batteries.
A Removing the Battery
Turn the camera off and open the
battery-chamber cover.
Press the
battery latch in the direction shown by
the arrow to release the battery and
then remove the battery by hand.
D The Battery and Charger
Read and follow the warnings and cautions on pages ix–x and 184–186 of this manual.
Do not
use the battery at ambient temperatures below 0°C/32°F or above 40°C/104°F; failure to
observe this precaution could damage the battery or impair its performance.
Capacity may
be reduced and charging times may increase at battery temperatures from 0°C/32°F to
15°C/59°F and from 45°C/113°F to 60°C/140°F.
If the CHARGE lamp flashes quickly (about
eight times a second) during charging, confirm that the temperature is in the correct range
and then unplug the charger and remove and reinsert the battery.
If the problem persists,
cease use immediately and take battery and charger to your retailer or a Nikon-authorized
service representative.
Do not attempt to charge a fully-charged battery.
Failure to observe this precaution will
result in reduced battery performance.
Use the charger with compatible batteries only.
Unplug when not in use.
w
q
Battery latch
e