Nikon 1503 Digital Camera User Manual


 
164
Choose the flash mode for the built-in flash in P, S, A, and M modes.
Choose the setting (exposure, white balance, or Active D-Lighting) varied when
bracketing is in effect (P, S, A, and M modes only; 0 83).
e: Bracketing/Flash
e1: Flash Cntrl for Built-in Flash
G button A Custom Settings menu
Option Description
1 TTL Flash output is adjusted automatically in response to shooting conditions.
2 Manual
Choose a flash level between Full and 1/32 (
1
/32 of full
power).
At full power, the built-in flash has a Guide
Number of 13/43 (m/ft., ISO 100, 20 °C/68 °F).
A Manual
A Y icon flashes in the viewfinder and 0 flashes in the
information display when Manual is selected and the flash is raised.
A The SB-400
When an optional SB-400 flash unit is attached and turned on, Flash cntrl for built-in flash
changes to Optional flash, allowing the flash control mode for the SB-400 to be selected
from TTL and Manual.
A Flash Control
The following types of flash control are supported when a CPU lens is used in combination
with the built-in flash (0 45) or optional flash units (0 204).
i-TTL Balanced Fill-Flash for Digital SLR: Information from the 2016-pixel RGB sensor is used to
adjust flash output for a natural balance between the main subject and the background.
Standard i-TTL Fill-Flash for Digital SLR: Flash output is adjusted for the main subject; the
brightness of the background is not taken into account.
Recommended for shots in which
the main subject is emphasized at the expense of background details, or when exposure
compensation is used.
Standard i-TTL flash control is used with spot metering or when selected with the optional
flash unit.
i-TTL balanced fill-flash for digital SLR is used in all other cases.
e2: Auto Bracketing Set
G button A Custom Settings menu