65
* A wireless remote controller can not be attached at the same time as an ME-1 stereo
microphone.
Attempting to forcibly attach accessories can damage the camera or
accessory.
Body cap
Body Cap BF-1B/Body Cap BF-1A: The body cap keeps the mirror, viewfinder screen,
and image sensor free of dust when a lens is not in place.
Remote
controls/
wireless
remote
controller
• Wireless Remote Control ML-L3 (0 4): The ML-L3 uses a 3 V CR2025 battery.
Pressing the battery-chamber latch to the right (q), insert a fingernail into the
gap and open the battery chamber (w).
Ensure that the battery is inserted in
the correct orientation (r).
• Wireless Remote Controller WR-R10
*
/WR-T10: When a WR-R10 wireless remote
controller is attached, the camera can be controlled wirelessly using a WR-T10
wireless remote controller.
The WR-T10 uses a 3 V CR2032 battery.
Insert a fingernail into the gap behind the battery-chamber latch and open the
battery chamber (q).
Ensure that the battery is inserted in the correct
orientation (e).
• Wireless Remote Controller WR-1: WR-1 units are used in groups of two or more, with
one functioning as a transmitter and the remaining units acting as receivers.
The receivers are attached to the accessory terminals of one or more cameras,
allowing the transmitter to be used to release the camera shutters.
Microphones Stereo Microphone ME-1
*
Accessory
terminal
accessories
The D5300 is equipped with an accessory terminal for
WR-1 and WR-R10 wireless remote controllers , MC-DC2 remote
cords, and GP-1/GP-1A GPS units, which connect with the 4
mark on the connector aligned with the 2 next to the
accessory terminal (close the connector cover when
the terminal is not in use).
USB and A/V
connector
accessories
• UC-E17 and UC-E6 USB cables (0 61): The supplied UC-E17 cable is not available for
separate purchase; purchase UC-E6 cables instead.
• EG-CP16 audio/video cables
A Optional Accessories
Availability may vary with country or region. See our website or brochures for the latest
information.