Nikon 1987 Camera Lens User Manual


 
En
23
14. Lens care
• Clean the lens surfaces with a blower brush. To remove dirt and
smudges, use a soft, clean cotton cloth or lens tissue moistened
with ethanol (alcohol) or lens cleaner. Wipe in a circular motion
from center to outer edge, taking care not to leave traces or
touch other parts of the lens.
• Never use thinner or benzene to clean the lens as this might
damage it, result in a fire, or cause health problems.
• To protect the front lens element, an NC filter is available. A lens
hood also helps protect the front of the lens.
• When storing the lens in its lens case, attach both front and rear
caps.
• When the lens will not be used for a long time, store it in a cool,
dry place to prevent mold. Also store the lens away from direct
sunlight or chemicals such as camphor or naphthalene.
• Do not get water on the lens or drop it in water as this will cause
it to rust and malfunction.
• Reinforced plastic is used for certain parts of the lens. To avoid
damage, never leave the lens in an excessively hot place.
15. Standard accessories
• 62mm snap-on front lens cap LC-62 • Rear lens cap LF-1
• Bayonet hood HB-42 • Flexible lens pouch CL-1018
16. Optional accessories
• 62mm screw-in filters, including circular polarizing filter II
17. Incompatible accessories
Teleconverters
Auto Ring BR-4 and all models of Auto Extension Ring PK, K
Ring and Bellows focusing attachment.
Other accessories may not be suitable for use with this lens. For
details, carefully read your accessories instruction manual.