Filter
Top Products
10
z
4
Focus.
Press the shutter-release button half-
way to focus. If the subject is poorly lit,
the AF-assist illuminator (0 2) may
light to assist the focus operation.
If the camera is able to focus, the selected
focus area will be highlighted in green
and a beep will sound (a beep may not
sound if the subject is moving).
If the camera is unable to focus, the focus
area will be displayed in red.
While the shutter-release button is
pressed halfway, the display will show
the number of exposures that can be stored in the memory
buffer (“r”).
5
Shoot.
Smoothly press the shutter-release
button the rest of the way down to
release the shutter and record the
photograph. The access lamp will
light and the photograph will be dis-
played in the monitor for a few sec-
onds (the photo will automatically
clear from the display when the shut-
ter-release button is pressed halfway).
Do not eject the memory card or remove
or disconnect the power source until the
lamp has gone out and recording is
complete.
Access lamp
Focus area
Buffer capacity