Filter
Top Products
E101
Reference Section
Failed to save 3D image
The camera failed to save the 3D image.
• Try shooting again.
• Delete images.
• 3D images may not be able to be created and saved
depending on the shooting conditions, such as when the
subject is moving, dark, or low in contrast.
44
32
–
Lens error
Lens is not operating properly.
Turn camera off and then on again. If error persists, contact
retailer or Nikon-authorized service representative.
22
Communications error
Error occurred during communication with printer.
Turn camera off and reconnect USB cable.
E30
System error
Error has occurred in camera’s internal circuitry.
Turn camera off, remove and reinsert batteries, and turn
camera on. If error persists, contact retailer or Nikon-
authorized service representative.
14, 23
Printer error: check
printer status.
Printer error.
Check printer. After solving the problem, select Resume and
then press the k button to resume printing.*
–
Printer error: check
paper
Specified size of paper is not loaded in printer.
Load the specified size of paper, select Resume, and then
press the k button to resume printing.*
–
Printer error: paper jam
Paper has jammed in printer.
Remove the jammed paper, select Resume, and then press
the k button to resume printing.*
–
Printer error: out of
paper
No paper is loaded in printer.
Load the specified size of paper, select Resume, and then
press the k button to resume printing.*
–
Display Cause/Solution
A