Filter
Top Products
178
n
Cleaning: When cleaning the camera body, use a blower to gently remove
dust and lint, then wipe gently with a soft, dry cloth. After using the cam-
era at the beach or seaside, wipe off any sand or salt using a cloth lightly
dampened in pure water and then dry the camera thoroughly.
The lens is easily damaged. Dust and lint should be gently removed with
a blower. When using an aerosol blower, keep the can vertical to prevent
discharge of liquid. To remove fingerprints and other stains from the
lens, apply a small amount of lens cleaner to a soft cloth and wipe the
lens carefully.
Storage: To prevent mold or mildew, store the camera in a dry, well-venti-
lated area. If you are using an AC adapter, unplug the adapter to prevent
fire. If the product will not be used for an extended period, remove the
battery to prevent leakage and store the camera in a plastic bag contain-
ing a desiccant. Do not, however, store the camera case in a plastic bag,
as this may cause the material to deteriorate. Note that desiccant gradu-
ally loses its capacity to absorb moisture and should be replaced at reg-
ular intervals.
To prevent mold or mildew, take the camera out of storage at least once
a month. Turn the camera on and release the shutter a few times before
putting it away.
Store the battery in a cool, dry place. Replace the terminal cover before
putting the battery away.
Notes on the monitor and viewfinder: These displays are constructed with
extremely high precision; at least 99.99% of pixels are effective, with no
more than 0.01% being missing or defective. Hence while these displays
may contain pixels that are always lit (white, red, blue, or green) or
always off (black), this is not a malfunction and has no effect on images
recorded with the device.
Images in the monitor may be difficult to see in a bright light.
Do not apply pressure to the displays, as this could cause damage or
malfunction. Dust or lint on the displays can be removed with a blower.
Stains can be removed by wiping lightly with a soft cloth or chamois
leather. Should the monitor or viewfinder break, care should be taken to
avoid injury from broken glass and to prevent liquid crystal from the dis-
play touching the skin or entering the eyes and mouth.