198
n
❚❚ The Optional FT1 Mount Adapter
Read this section for information on using the optional FT1
mount adapter. Before proceeding, be sure that you have read
and understood this manual and the documentation for the FT1
and lenses.
Autofocus
Autofocus is available only with AF-S lenses; other lenses sup-
port manual focus only. Set the camera focus mode to AF-S (the
camera will not focus in other autofocus modes). The only AF-
area mode available is Single-point and the camera focuses on
the subject in the center focus area only. Face priority is not sup-
ported. In some cases, a beep may sound, the in-focus indicator
may be displayed, and pictures can be taken when the camera is
not in focus; if this occurs, focus manually.
Manual Focus
Follow the steps below to focus manually when using the FT1
with a NIKKOR F mount lens.
1
Select manual focus mode.
In the shooting menu, select Focus mode, highlight Manual
focus, press 2, and choose the magnification for the manual
focus display from 10×, 5×, and 2× (0 131).
2
Focus.
Rotate the lens focus ring until the
subject is in focus.