Filter
Top Products
15
Basic Photography
Step 2 — Frame the Picture
1
Ready the camera
Hold the camera steadily in both hands.
Don’t Block the Shot
To avoid muffl ed sound or dark or partially obscured
pictures, keep fi ngers and other objects away from
the microphone, lens, fl ash, and AF-assist lamp.
2
Frame the subject
The camera is equipped with two types of built-in
zoom: optical zoom, in which the camera’s tele-
scoping lens can be used to magnify the subject up
to 3 ×, and digital zoom, in which digital processing
is used to further magnify the image up to 4 ×, for a
total of 12 ×. Use the zoom buttons to frame your
subject in the center of the monitor:
• Press the button to zoom out from your sub-
ject, increasing the area visible in the frame.
• Press the button to zoom in on your subject
so that it fi lls a larger area of the frame.
• When the camera is zoomed in to maximum
magnifi cation, holding the button down for
over a second will trigger digital zoom, and the
zoom indicator will turn yellow. Use the and
buttons to adjust zoom in the digital zoom
range. To cancel digital zoom, press until the
zoom indicator turns white.
Digital Zoom
In digital zoom, data from the camera’s image sensor are processed digi-
tally, enlarging the center portion of the picture to fi ll the frame. Unlike
optical zoom, digital zoom does not increase the amount of detail visible
in the picture. Instead, details visible at maximum optical zoom are simply
enlarged, producing a slightly “grainy” image.
Indicator shows
amount of zoom
AUTO
10
Zo
out
m
in
Digital zoom
AUTO
10
Do Not Touch the Lens
Avoid touching the lens when opening or closing the sliding lens cover.
Close the Multi-Connector Cover
Make sure the multi-connector cover is tightly closed before using the camera.