Nikon 4129 Camera Lens User Manual


 
24
En
When using the B and E focusing screens in cameras other than those listed above,
refer to the columns for the B and E screens.
11. Lens care
Clean the lens surfaces with a blower brush. To remove dirt and smudges, use a
soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens
cleaner. Wipe in a circular motion from center to outer edge, taking care not to leave
traces or touch other parts of the lens.
Never use thinner or benzene to clean the lens as this might damage it, result in a
fire, or cause health problems.
To protect the front lens element, an NC filter is available. A lens hood
1 also helps
protect the front of the lens.
When storing the lens in its lens case, attach both front and rear caps.
When the lens will not be used for a long time, store it in a cool, dry place to
prevent mold. Also store the lens away from direct sunlight or chemicals such as
camphor or naphthalene.
Do not get water on the lens or drop it in water as this will cause it to rust and
malfunction.
Reinforced plastic is used for certain parts of the lens. To avoid damage, never leave
the lens in an excessively hot place.
12. Standard accessories
62mm snap-on front lens cap LC-62 • Rear lens cap LF-1
• Bayonet hood HB-38 • Flexible lens pouch CL-1020
13. Optional accessories
62mm screw-in filters, including circular polarizing filter II
AF-S Teleconverters* TC-14EII/TC-17EII/TC-20EII can be used. *Autofocus operation
is not possible. (VR and AE functions are available.)
14. Incompatible accessories
• Auto Ring BR-4 and all models of Auto Extension Ring PK, K Ring and Bellows
focusing attachment.
Other accessories may not be suitable for use with this lens. For details, carefully read
your accessories instruction manual.