Nikon 55MM F/2B Digital Camera User Manual


 
Recommended Focusing Screens
Various interchangeable focusing screens are
available for F3- and F2-series cameras to suit
any type of lens or picture-taking situation.
Those which are recommended for use with
your lens are listed below. For screens used
with Nikon cameras other than F3- and F2-
series cameras
(e.g.,
Nikon FA, FE2, FM2 and
FE),
refer to the column for F3-series cameras.
For the K2, B2 and E2 focusing screens, refer
to the columns on the K, B and E screens,
respectively. For details, also refer to the spe-
cific focusing screen's instruction sheet.
A/L¥|C"
D|E|
Gl I G3 |G3|G4 HI H2 H3 H4 J K/P M R T U
o
tii.
.!•;.
O _
When the TC-201 or TC-200 teleconverter is at-
tached to this lens, use the following table:
When the TC-14A teleconverteris attached to this
lens,
use the following table:
A/L BCD E Gl GZ G3 G4 Ht H2 H3JH4 J K/PM^J^^
*The
TC-301,
TC-300, TC-14B or TC-14 telecon-
verter cannot be used with this lens.
© = Excellent focusing
= Acceptable focusing
The image is brilliant from edge to edge, but the
center area (range-finder, microprism or cross-
hair) is dim. Focus on the surrounding matte
area.
O = Acceptable focusing
Slight vignetting (or moire phenomenon, in the
case of the microprism) affects the screen image.
The image on the
film,
however, shows no trace
of this.
E3
= Exposure measurement not possible.
( )= Indicates degree of exposure compensation.
Blank means not usable.
17