Filter
Top Products
16
Jp
En
De
Fr
Es
Sv
Ru
Nl
It
Cz
Sk
Ro
Ua
Ck
Ch
Kr
■ Aperture
Aperture is adjusted using camera controls.
■ Built-in Flash Units
When using the built-in flash on cameras equipped with a
built-in flash unit, remove the lens hood to prevent vignetting
(shadows created where the end of the lens obscures the
built-in flash).
■ The Lens Hood
The lens hoods protects the lens and blocks stray light that
would otherwise cause flare or ghosting.
When attaching or removing the hood, hold it near the
symbol on its base and avoid gripping it too tightly.
Vignetting may occur if the hood is not correctly attached.
The hood can be reversed and mounted on the lens when not in
use. When the hood is reversed, it can be attached and
removed by rotating it while holding it near the lock mark (
—
{
).
Align the lens hood lock mark (—{) with
the lens hood mounting mark (●) on the
lens (e).