Nikon coolpix Digital Camera User Manual


 
E28
Reference Section
B If Images Are Not Displayed on the TV
Be sure that the camera’s video mode setting in the TV settings (E99) under the setup menu
conforms to the standard used by your TV.
C Using a TV Remote Control (HDMI Device Control)
The remote control of an HDMI-CEC-compatible TV can be used to control playback.
It can be used instead of the camera’s multi selector and zoom control to select images, start and
pause movie playback, switch between full-screen playback mode and four-image thumbnail
display, etc.
Set the HDMI device control setting (E99) of TV settings to On (default setting) and then
connect the camera and TV using an HDMI cable.
Aim the remote control at the TV when operating it.
Refer to the TV’s operating instructions for information about the TV’s HDMI-CEC compatibility.