Filter
Top Products
F11
Technical Notes and Index
Monitor is blank.
• Camera is off.
• Battery exhausted.
• Standby mode for saving power: Press the power
switch, the shutter-release button, c (shooting/
playback mode) button, or b (e movie-record)
button.
• When flash lamp flashes, wait until flash has
charged.
• Camera and computer are connected via USB
cable.
• Camera and TV are connected via audio/video
cable.
21
20
2, 21
36
68, 73
68, E50
Monitor is hard to read.
• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.
84, E40
F8
Date and time of recording
are not correct.
• If camera clock has not been set, O flashes when
shooting images and recording movies. Images
and movies saved before clock is set are dated “00/
00/0000 00:00” or “01.01.13 00:00” respectively. The
shooting date and time of still images is not
displayed during playback. Set the correct time and
date using Date and time in the camera settings
menu.
• Check camera clock regularly against more
accurate timepieces and reset as required.
16, 84,
E39
Print date not available.
Date and time in the camera settings menu has not
been set.
16, 84,
E39
Problem Cause/Solution A