Filter
Top Products
235
Connections—Connecting to a Computer
*Mac OS X version 10.3.9 or later required for Camera Control Pro.
†Do NOT select PTP. If PTP is selected when the camera is connected, the Windows
hardware wizard will be displayed. Click Cancel to exit the wizard, and then discon-
nect the camera. Be sure to select Mass storage before reconnecting the camera.
Operating system PictureProject
Windows 2000 Professional
Choose
Mass Storage
†
Camera Control Pro
Windows XP Home Edition
Windows XP Professional
Choose PTP or
Mass Storage
Mac OS X
*
Choose PTP
Windows Millennium Edition (Me)
Windows 98 Second Edition (SE)
Not supported
Connecting to a Computer
Data Transfer and Camera Control
The supplied UC-E4 USB cable can be used to connect the camera to a com-
puter. Once the camera is connected, PictureProject can be used to copy
photographs to the computer, where they can be browsed, viewed, and
retouched. The camera can also be used with other applications available
separately from Nikon, including Capture NX, which supports batch process-
ing and more advanced image editing options, and Camera Control Pro,
which can be used to control the camera directly from the computer.
Before Connecting the Camera
Install the necessary software after reading the manuals and reviewing the
system requirements. To ensure that data transfer is not interrupted, be sure
the camera battery is fully charged. If in doubt, charge the battery before use
or use an EH-6 AC adapter (available separately).
Before connecting the camera, set the USB option
in the setup menu ( 220) according to the com-
puter operating system and the software used:
The USB Cable Clip
To prevent cable from being disconnected, fasten the clip as shown.
D
C
IN