Filter
Top Products
101
k
A The Shooting Information Display
To hide or display indicators in the monitor in live view mode, press the R
button.
1 Only displayed during exposure preview (tripod mode; pg. 99).
2 Not displayed when view through lens is zoomed in.
A Monitor Brightness
Monitor brightness can be adjusted by pressing the K button while the
view through the monitor is displayed.
Press 1 or 3 to adjust brightness
(note that monitor brightness has no effect on pictures taken in live view
mode).
To return to live view, release the K button.
Monitor brightness
can not be adjusted during exposure preview (pg. 99).
A HDMI
When the camera is attached to an
HDMI video device, the camera monitor
will turn off and the video device will
display the view through the lens as
shown at right.
A Remote Cords
If the shutter-release button on a remote cord (available separately; see
pg. 388) is pressed halfway for over a second in tripod mode, it will
activate contrast-detect autofocus.
If the remote cord shutter-release
button is pressed all the way down without focusing, focus will not be
adjusted before the picture is taken.
Shooting information display
Shooting info + histogram
1, 2
Framing guides
2
Shooting information off
Exit
Exit
Exit