![](http://pdfasset.owneriq.net/6/2b/62b6f914-7710-4e22-ba82-70dcb535964a/62b6f914-7710-4e22-ba82-70dcb535964a-bg2b.png)
23
X
4 Remove the battery when charging is complete.
Charging is complete when the CHARGE lamp stops
blinking.
Remove the battery and unplug the charger.
Insert the Battery
1 Turn the camera off.
Always turn the camera off before inserting or
removing batteries.
2 Open the battery-chamber cover.
Open the battery-chamber cover on the bottom of the
camera.
3 Insert the battery.
Insert the battery as shown at right.
4 Close the battery-chamber cover.
❚❚Removing the Battery
Before removing the battery, turn the camera off.
To prevent short-circuits, replace
the terminal cover when the battery is not in use.
Power switch