Filter
Top Products
70
t
Exposure Compensation
Exposure compensation is used to alter exposure from the value suggested by the
camera, making pictures brighter or darker.
It is most effective when used with
M (Center-weighted metering) or N (Spot metering) (0 68).
Choose from values
between –5 EV (underexposure) and +5 EV (overexposure) in increments of
1
/3 EV.
In
general, positive values make the subject brighter while negative values make it
darker.
1 Place the cursor in the information display.
If shooting information is not displayed in the monitor, press the P button.
Press the P button again to place the cursor in the information display.
2 Display exposure compensation options.
Highlight exposure compensation in the
information display and press J.
3 Choose a value.
Highlight a value and press J.
To return to
shooting mode, press the shutter-release button
halfway.
Normal exposure can be restored by setting exposure compensation to ±0.
Exposure
compensation is not reset when the camera is turned off, but is reset if you select
another mode after choosing %.
–1 EV No exposure compensation +1 EV
Information display P button