Filter
Top Products
Macro focusing function: Equipped via focusing
ring;
operable at any focal
length;
close focusing down to 0.35m (1 ft) is possible; maximum reproduc-
tion ratio is 1:4.4
Aperture scale: f/3.3 to f/22 on both standard and aperture-direct-readout scale
(At f/4 only a click stop is provided)
Diaphragm: Fully automatic
Exposure measurement:
Via
full-aperture method
Mount: Nikon bayonet mount
Attachment size: 52mm dia. (P = 0.75mm)
Dimensions: Approx. 63mm dia. x
61
mm extension from flange; approx. 69mm
long (overall)
Weight: Approx. 255g
Accessories
52mm snap-on front lens cap
Rear lens cap LF-1
52mm screw-in filters
Screw-in lens hood HN-2
Hard lens case CL-31S
Soft lens case No. 62
TeleconverterTC-201
Teleconverter TC-14A
LENS CARE
• Although you should always keep the lens surfaces clean, rough cleaning
must be avoided. Wipe with a soft, clean cotton cloth moistened with alcohol
to remove grease or fingerprints from the lens surfaces.
If you use ether in cleaning the lens, a smudge sometimes appears on the
surface of a multi-coated lens. If this happens, wipe it again with a cotton
cloth moistened with alcohol.
• To clean the rear lens element without getting dust or any other material
inside the lens, first turn the zooming ring to the 35mm focal length, then use
a blower to remove dust or foreign objects; then wipe the surface of the rear
lens element as described above.
• To protect the lens surface from dirt or damage, the use of an L37C filter is
recommended at all times. The lens hood also helps to protect the lens.
• Keep the lens cap in place whenever the lens is not in use.
• Attach both the front and rear caps when the lens is stored separately.
• To ensure proper fit of the lens when stored in the leather lens case, set the
lens focusing ring to the infinity
(<»)
and the zooming ring to the 50mm setting.
15