Filter
Top Products
Recommended Focusing Screens
Various interchangeable focusing screens are available for F3- and F2-
series cameras to suit any type of lens or picture-tacking
situation.
Those
which are recommended for use with your lens are listed below. For
screens used with Nikon cameras other than F3-and F2-series cameras
(e.g.,
Nikon FA, FE2, FM2 and FE), refer to the coloumn for F3-series
cameras. For the K2, B2 and E2 focusing screens, refer to the columns
on the K, B and E screens, respectively. For details, also refer to the
specific focusing screen's instruction sheet. _^_^_____
---^^^ Screen
Camera ' --—^___
F3
F2
A/L
©
©
B
0
©
c
•
•
D
©
©
E
©
©
Gl
©
©
G2
0
0
G3 G4
HI
©
©
H2
©
©
H3
©
©
H4J
J
©
o
K/P
©
©
M
R
A
A
T
U
CO)
• When the Teleconverter TC-201 or TC-200 is attached to this lens, use the fol-
lowing table:
"""----^^^ Screen
Camera ^^~~~^~—-^_
F3
F2
A/L
•
•
B
©
0
c D
E
0
©
Gl
G2
o
o
G3
G4
HI
H2
O
O
(-a
H3 H4
J
©
©
K/P
•
®
M
R
©
©
T
m
u
• When the Teleconverter TC-14A is attached to this lens, use the following table:
~"~ ^^^ Screen
Camera ^~"-~-~-^^
F3
F2
A/L
©
©
B
0
©
c D
E
©
©
Gl
G2
©
©
G3
G4
HI
H2
H3
H4
J
©
©
K/P
©
©
M
R
©
©
T
©
U
©= Excellent focusing
9= Acceptable focusing
The split-image rangefinder, microprism or cross-hair area is dim. Focus on the
surrounding matte area.
0= Acceptable focusing
Slight vignetting or moire phenomenon affects the screen image. But the image
on film shows no trace of this.
A= Acceptable focusing
The in-focus image in the central spot may prove to be slightly out of focus
on
film.
Focus on the surrounding matte area.
•= Exposure measurement not possible
Lens/screen combination permits only focusing operation.
()= Indicates degree of exposure compensation.
Blank means not usable.