Nikon L22 Digital Camera User Manual


 
95
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
w Electronic VR
Choose whether to use electronic VR (vibration reduction) when taking still
pictures.
When Auto is selected, R appears on the monitor (A 8), and electronic VR is
applied depending on shooting conditions.
Press the d button M z (Setup menu) (A85) M w Electronic VR
Auto
When all of the following conditions are met while taking still pictures, electronic VR
is applied and the effects of camera shake are reduced.
The flash is turned off or set to slow sync mode.
The shutter speed is slow.
The Continuous setting is set to Single.
When the subject is dark.
Off (default setting)
Electronic VR is disabled.
B Notes on Electronic Vibration Reduction
Electronic VR is disabled while the flash is used, except when using slow sync mode. Note that
Electronic VR is disabled even when flash mode is slow sync with red-eye reduction (A37, 38).
If the exposure period exceeds a certain period of time, Electronic VR will not function.
Electronic VR cannot be used when using the following scene modes.
-Sports (A37)
- Night portrait (A 37)
-Dusk/dawn (A39)
-Night landscape (A 39)
- Museum (A 40)
- Fireworks show (A 41)
-Backlight (A 41)
The effectiveness of Electronic VR decreases as camera shake increases.
Pictures taken using motion detection may be somewhat grainy.