Filter
Top Products
32
Auto Mode
Exposure Compensation
Exposure compensation is used to alter exposure from the value suggested by the
camera to make pictures brighter or darker.
1 Press o (exposure compensation) on the
multi selector.
The exposure compensation guide is displayed.
2 Press the multi selector H or I to select the
desired setting and press k.
To make the subject brighter, adjust the exposure
compensation to the “+” side.
To make the subject darker, adjust the exposure
compensation to the “-” side.
Exposure compensation can be set to values between
-2.0 and +2.0 EV.
If a setting is not applied by pressing k within a few seconds, the selection will be
cancelled.
When set to any value other than 0.0, H and the value are displayed.
3 Press the shutter-release button to shoot.
To turn off exposure compensation, repeat from step 1
and set the value to 0.0, then press k.
Exposure compensation
4
4
C Exposure Compensation Value
When the shooting mode is A (auto) mode (A27), the exposure compensation setting will be
stored even if the camera is turned off.