Filter
Top Products
25
Confirm that automatic multi-
pattern metering is in
operation by making sure that the
metering control button is in the
normal “out” position and the red
index is not on top (refer to page 40
for more information)
4.
Look through the viewfinder and check the exposure information. The
shutter speed you set is shown at The upper right-hand corner. When the
shutter release button is depressed halfway, the LCD at the upper left-hand corner
shows the aperture (a number preceded by F) selected by the camera to match the
shutter speed you selected
If the LCD shows the shutter speed (a number without F), this means you cannot
obtain the correct exposure at the shutter speed you selected and the camera is
overriding your choice by automatically selecting a slower or Faster speed.
With an Al-modified Nikkor lens, Nikon Teleconverter TC-200, TC-300 or TC-14, PK
ring or bellows attachment attached, the LCD shows F - -, instead of the aperture
selected by the camera. In the same way, a shutter speed will appear instead of the
F - -, if the camera automatically modifies the shutter speed you selected to obtain
correct exposure
5.
WWW.LENSINC.NET / WWW.CAMERA-FIX.COM