Filter
Top Products
61
Selecting Scenes for Shooting (Scene Mode)
More on Shooting
5
Frame the first portion of the
panorama scene and take the first
picture.
• 1/3 of the image will be displayed as
translucent.
6
Shoot the next picture.
• Match the outline of the next picture so that
1/3 of the frame overlaps the previous picture,
and press the shutter-release button.
• Repeat until you have taken the necessary
number of pictures to complete the image.
7
Press the k button when shooting is completed.
• The camera returns to step 4.
B Notes on Panorama Assist
• Set the flash mode, self-timer, macro mode and exposure compensation before releasing the
shutter for the first picture. The settings cannot be changed after shooting the first picture. Pictures
cannot be deleted, nor can zoom, or Image mode (A74) be adjusted after shooting the first
picture.
• The panorama series is terminated if the auto off function (A153) triggers the standby mode
during shooting. To prevent this, setting a longer time for the auto off function is recommended.
D R (exposure lock) Indicator
When using panorama assist mode, all pictures in the panorama
have the same exposure, white balance, and focus as the first picture
of the panorama.
When the first picture is shot, R is displayed to indicate that
exposure, white balance, and focus are locked.
D Panorama Creation
Transfer pictures to a computer (A130) and use Panorama Maker 5 (A133) to join them in a single
panorama.
Install Panorama Maker 5 on a computer using the supplied ViewNX 2 CD-ROM.
D More Information
See “File and Folder Names” (A168) for more information.
1/250
1/250
1/250
1342
1342
1342
F5.6
F5.6
F5.6
1341
1341
1341
End
End
End
1341
1341
1341
End
End
End