Filter
Top Products
Programmed TTL Auto Flash Shooting (with Nikon F-501/N2020, F-401/N4004 or
F-301/N2000)
Steps 7 through 9 provide instructions for programmed
TTL auto flash shooting wi
th
the Nikon F
-5
01
/N2020*,
F-401lN4004** or F-301/N2000* camera.
For other flash exposure operations (TTL auto, non-TTL
auto and manual flash exposure operations) s
ee
"SET-
TING CAMERA SHUTTER
SPEED
"
on
page
16
and
" DETERMINING
APERTURE,
" pages
17
to
32.
*
The
Nikon N2020 and N2000 are sold exclusively in the
U.S.A.
and
Canadian markets.
**
The
Nikon N4004 is sold exclusively in the U.S.A. market.
~----------------,
"
For programmed TTL automatic flash opera- "
tion, no
te
the following :
, • Use
AI
-S
type lenses only. With Nikon F-
401
1 I
I
N4004, use only
AF
-Nikkor lenses, except ,
,
AF
-Nikkor
80mm
f
/2.8,
2
00mm
f/3.5
IF
-
ED
,
, and Autofocus Converter
TC-16
/
TC-16A.
,
, • For autofocus operation, set the Nikon I
, F-501/N2020's focus mode
se
lector to S for I
Single Servo Autofocus mode, or set the
, Nikon
F-401
/N4004
to
A for autofocus mode. I
I
For details, see pages
13
to
1
5.
I
\ I
~----------------~
7.
Set the 58-22's flash mode selector
to TTL.
For the flash shooting range
in
programmed TTL auto-
matic operation, see the table
on
page 20.
The patterned bar
in
the middle of the flash shooting
distance range indicators also shows the flash shoot-
ing range
in
programmed TTL automatic operation.
To
read the programmed aperture, set the film speed
knob. The figure at the left of the patterned bar is the
programmed aperture.
9