•
Do not
subject
the
TC-16
to
shocks—especially avoid dropping
or
banging
it on anything
hard.
•
If
condensation forms
on the
TC-16 body, wipe
it
with
a dry
soft cloth.
If it
forms on the lens itself, observe the following—
use
a
blower brush
to
clean all glass surfaces;
as
much as possible avoid
using lens tissue. Gently wipe dirt, smudges
or
fingerprints with soft cotton
moistened with
a
small amount
of
absolute alcohol, using
a
spiral motion
from center to periphery. Make sure you leave no wiping traces.
If you use ether in cleaning the lens surface, smudges may appear on
the
surface; should this happen, wipe
the
smudges with
a
cotton cloth mois-
tened with absolute alcohol.
• Altach both front and rear lens caps
BF-1
and
LF-1
to your TC-16 when stor-
ing
11
separately, preferably inside the optional lens pouch No.
61;
also, avoid
storage in a high-temperature and high-humidity place.
ACCESSORIES
Supplied
Front lens cap BF-1
Rear lens cap LF-1
Optional
Flexible lens pouch No.
61
SPECIFICATIONS
Lens construction:
5
elements
in 5
groups
Focal length: 1.6X thai
of
lens in use (with in-focus
at
infinity)
Aperture coupling range: f/1
B
to
f/32
Effective aperture: f/2.9
to
f/51
Focusing: Via built-in micro motor to move all lens groups
Power
switch:
Provided; "ON/OFF" type
Battery source: Via electrical contact pins directly from
the
battery power inside DX-1 AF Finder
Focus lock: Possible via one focus lock button provided
Diaphragm: Automatic diaphragm coupling provided
Exposure measurement: Via full aperture method; meter coupling ridge
provided
Reproduction ratio: 1.6X that
of
lens
in use
Depth
of
field:
1/1.6X
that
of
lens
in
use (with in-focus
at
infinity)
Mount: Nikon
F
mount (for both sides); AF electrical
coupling pins provided on the rear side
Dimensions: Approx. 88mm
dia.
x
43.8mm long (overall);
21
mm extension from flange
Weight: Approx. 285g
21