Filter
Top Products
Using the Nokia Image Frame
17
Copyright
© 2003 Nokia. All rights reserved.
1. If needed, activate the IR port of the device to which you want to send an
image.
2. Direct the IR ports of the Nokia Image Frame and the receiving compatible
device toward each other, and ensure that there are no obstructions between
the devices. The maximum allowed distance is up to 1.5 m and the
transmission angle 15
o
.
3. Press and to send the image. The icon blinks while the Nokia Image
Frame attempts to establish a connection to the receiving device. During the
image transfer the icon stops blinking. When the image is successfully
sent, the Nokia Image Frame displays the icon.
■ Receiving images with the Nokia Image Frame
When the power is switched on, the Nokia Image Frame can receive images. Note
that the Nokia Image Frame converts the received images to display them. For
more information, see Image format on page 6.
The image receiving procedure differs depending on the sending device. If the
sending device can send images over IR, you can send the selected images from
the device while the Nokia Image Frame is in the passive IR reception mode. If
image sending cannot be activated from the sending device, the Nokia Image
Frame can pull all the images from the sending device’s default image folder using
the active IR reception mode.