NuTone VSC4R Security Camera User Manual


 
3
1. READ THESE INSTRUCTIONS — All the safety and
o
perating instructions should be read before the product
is operated.
2. RETAIN INSTRUCTIONS — The safety and operating
i
nstructions should be retained for future reference.
3. HEED ALL WARNINGS — All warning on the product
and in the operating instructions should be adhered to.
4. FOLLOW ALL INSTRUCTIONS — All operating and use
instructions should be followed.
5. CLEANING — Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol.
Use a dry cloth for cleaning.
6. ATTACHMENTS — Do not use attachments not recom-
mended by the product manufacturer, as they may cause
hazards.
7. WATER AND MOISTURE — Do not use this product
near water—for example, near a bath tub, wash bowl,
kitchen sink, laundry tub, in a wet basement, near a
swimming pool, and the like.
8. ACCESSORIES — Do not place this product on an
unstable cart, stand, tripod bracket, or table. The product
may fail, causing serious injury to a child or adult, and
serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the man-
ufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer’s instructions, and
should use a mounting accessory recommended by the
manufacturer.
9. VENTILATION — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of
the product.
They protect it from overheating, and these openings
must not be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in built-in installation such as a bookcase or
rack unless proper ventilation is provided, or the manufac-
turer,s instructions have been adhered to.
10. POWER SOURCES — This product should be operated
only from the type of power source indicated on the mark-
ing label. If you are not sure of the type of power supply
in your home, consult your product dealer or local power
company. For products intended for operation from bat-
tery power or other sources, refer to operating instruc-
tions.
11. GROUNDING OR POLARIZATION — This product may
be equipped with a polarized alternating current line plug
(a plug having one blade wider than the other).
This plug
will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug still cannot be
inserted, contact your electrician to replace you obsolete
outlet. Do not defeat the safety purpose of the polarized
p
lug.
12. POWER-CORD PROTECTION — Power-supply cords
should be routed so that they are not likely to be walked
o
n or pinched by items placed upon or against them pay-
ing particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the prod-
uct.
13. OUTDOOR ANTENNA GROUNDING — If an outside
antenna or cable system is connected to the product, be
sure the antenna or cable system is grounded so as to
provide some protection against voltage surges and built-
up static charges. Article 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with regard to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, an
requirements for the grounding electrode (Refer to the fig-
ure on page 4).
14. LIGHTNING — For added protection of the product dur-
ing a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and
power-line surges.
15. POWER LINES An outside antenna system should not
be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits.
16. OVERLOADING — Do not overload wall outlets, exten-
sion cords, or integral convenience receptacles, as this
can result in a risk of fire or electric shock.
17. OBJECT AND LIQUID ENTRY — Never push objects of
any kind into the product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the product.
18.
SER
VICING
— Do not attempt to service this product
yourself as opening or removing covers my expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personal.
19. DAMAGE REQUIRING SERVICE — Unplug this product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions.
A. When the power-supply cord or plug is damaged.
B.
If liquid has been spilled, or objects have fallen into the
product.
C. If the product has been exposed to rain or water
.
D.
If the product does not operate normally by following
IMPORTANT SAFETY INSTRUCTIONS