Filter
Top Products
The autofocus didn't work correctly. There are
some subjects that are difficult for the autofocus to
lock on. These include: glossy or reflective
surfaces, black objects, subjects behind glass or
wire mesh, flames and smoke, excessively bright
light within the picture area.
First focus on an object at the same distance
as the desired subject. Then aim at the desired
subject and release the shutter release button.
(p. 25)
The picture is too dark.
The flash was blocked, (e.g. by a finger).
Hold the camera correctly, keeping your fingers
clear of the flash. (p. 15)
The subject was out of the working range of the flash.
Shoot within the flash working range. (p. 35)
The flash mode was set to Off.
Check the flash mode before shooting. (p. 33)
63