Filter
Top Products
35
EN
For information on using the menus, see “Using the Menu” (p. 4).
Switching between home and travel destination time zones [WORLD TIME]
s (Settings 2) X WORLD TIME
You will not be able to select a time zone using [WORLD TIME] if the camera clock has not fi rst been
set using [X].
Submenu 2 Submenu 3 Application
HOME/ALTERNATE
x
The time in the home time zone (the time zone selected for x in
submenu 2).
y
The time in the travel destination time zone (the time selected for y
in submenu 2).
x
*1
— Select the home time zone (x).
y
*1, 2
— Select the travel destination time zone (y).
*1
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on.
*2
When you select a time zone, the camera automatically calculates the time difference between the selected
zone and the home time zone (x) to display the time in the travel destination time zone (y).
Selecting a video signal system to match your TV [VIDEO OUT]
s (Settings 2) X VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV’s video signal type.
Submenu 2 Application
NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.
PAL Connecting the camera to a TV in European countries, China, and so on.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1 Use the camera to select the same video signal system as the one of connected TV
([NTSC]/[PAL]).
2 Connect the TV and camera.
FE-4040
FE-4020/X-940
Connect to the TV video
input jack (yellow) and
audio input jack (white).
Multi-connector
AV cable (supplied)
Connector cover