Filter
Top Products
34
EN
Selecting the camera sound and its volume [SOUND SETTINGS]
s (Settings 2) X SOUND SETTINGS
Submenu 2 Submenu 3 Submenu 4 Application
SILENT MODE
*1, 2
OFF/ON —
Select [ON] to disable camera sounds
(operating sound, shutter sound, and warning
sound) and mute sound during playback.
BEEP
SOUND TYPE
1/2/3
Selects the operating sound and volume
of the camera buttons (except the shutter
button).
VOLUME
OFF (No Sound) or
2 levels of volume
SHUTTER SOUND
SOUND TYPE
1/2/3
Selects the type and volume of the shutter
sound.
VOLUME
OFF (No Sound) or
2 levels of volume
8
OFF (No Sound) or
2 levels of volume
— Adjusts the warning sound volume.
q VOLUME
OFF (No Sound) or
5 levels of volume
— Adjusts the image playback volume.
*1
Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback.
*2
Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television.
Adjusting the CCD and the image
processing function [PIXEL MAPPING]
s (Settings 2) X PIXEL MAPPING
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
To adjust the CCD and the image
processing function
Press the H button when [START]
(Submenu 2) is displayed.
The camera checks and adjusts the CCD and the
image processing function at the same time.
●
Adjusting the brightness of the monitor
[s]
s (Settings 2) X s
Submenu 2 Application
BRIGHT/
NORMAL
Selects the monitor brightness
depending on the surrounding
brightness.
Setting the date and time [X]
s (Settings 2) X X
“Setting the date, time and time zone”
(p. 12)
To select the date display order
1 Press I after setting Minute, and use
FG to select the date display order.
02 26 12 30:..2010
OK
SET
X
Y M D TIME
MENU
CANCEL
Y/M/DY/M/D
Date order