Filter
Top Products
10
EN
Preparing the Camera
Insert the battery by putting in the ▼ marked
side fi rst, with the C marks toward the
battery lock knob.
Damage to the battery exterior (scratches,
etc.) may produce heat or an explosion.
Insert the battery while sliding the battery
lock knob in the direction of the arrow.
Slide the battery lock knob in the direction
of the arrow to unlock, and then remove the
battery.
Turn off the camera before opening the
battery/card compartment cover.
When using the camera, be sure to close
the battery/card compartment cover.
Battery charge and camera
setup
Connect the camera to the computer to charge
the battery and setup the camera.
System requirements
Windows XP (SP2 or later)/Windows Vista/
Windows 7
When using another system other
than the above or no computer,
see “Charging the battery with the
included USB-AC adapter” (p. 12).
Inserting the battery
1
2
3
Battery/card compartment coverBattery/card compartment cover
Battery lock knobBattery lock knob