Filter
Top Products
You stood directly in front of the camera and pressed the
shutter release button when using the selftimer.
Press the shutter release button while looking through
the viewfinder, not when standing in front of the camera.
(p. 40)
The finished prints are dark.
The fingers, etc., were in front of the flash.
Hold the camera correctly so the flash is not covered by
the fingers, etc. (p. 17)
The subject was beyond the flash range.
Position the subject within the flash range. (p. 33)
The Flash Off mode was set.
Check the flash mode and reset if necessary. (p. 35)
The picture was taken with backlighting.
Set the Fill-in mode and take the picture. (p. 36)
The colors in indoor pictures are not normal.
The colors were affected by the color of the indoor lighting.
Set the Fill-in mode and take the picture. (p. 36)
52