Filter
Top Products
38
Menu operations
2
The factory default settings differ according to the region where the camera
is sold.
To play back camera images on a TV, set the video output according to your TV’s
video signal type.
• TV video signal types by country/region Check the video signal type before
connecting the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
Set the display or nondisplay of the histogram when d button is pressed in
shooting mode.
Set the display or nondisplay and the type of frame assist to be displayed when
d button is pressed in shooting mode.
VIDEO OUT ...........................................................Playing back pictures on a TV
NTSC / PAL
u..........................................................................................Display the histogram
OFF / ON
FRAME ASSIST.................................Display the frame assist/Decide the type
OFF / w /x
Connect to the TV’s video
input (yellow) and audio
input (white) terminals.
AV cable (provided)
Multi-connector
Connector cover
Settings on the camera
Set the mode dial to q, and press
the o button to turn the camera
on.
• The last picture taken is displayed
on the TV. Use the arrow pad
(1243) to select the picture you
want to display.
Settings on the TV
Turn the TV on, and set it to video
input mode.
• For details of switching to video
input, refer to your TV’s instruction
manual.