Filter
Top Products
Menu operations
22
EN
[e SHOOT & SELECT1]/[f SHOOT & SELECT2]
• These scene modes allow you to take sequential pictures by holding down the shutter
button. After shooting the pictures, select the ones you want to erase by marking them with
a R and press S to erase them.
• When [DRIVE] is set to [W], [ISO] is fixed at [AUTO].
CAMERA MENU
WB
................................................................................................. Adjusting the color of a picture
AUTO The white balance is adjusted automatically for natural color,
regardless of the light source.
5 Sunny day For shooting under a clear sky.
3 Cloudy day For shooting under a cloudy sky.
1 Tungsten light For shooting under tungsten lighting.
w Fluorescent
lamp 1
For shooting under daylight fluorescent lighting. (This type of lamp is
mainly used in homes.)
x Fluorescent
lamp 2
For shooting under a neutral white fluorescent lamp. (This type of
lamp is mainly used in desk lamps.)
y Fluorescent
lamp 3
For shooting under a white fluorescent lamp. (This type of lamp is
mainly used in offices.)
ISO......................................................................................................Changing the ISO sensitivity
AUTO Sensitivity is automatically adjusted according to the conditions of the
subject.
HIGH ISO AUTO This function uses higher sensitivity compared to [AUTO] to minimize blur
caused by a moving subject or by camera movement.
80/100/200/400/
800/1600
A low value lowers the sensitivity for daylight shooting of clear, sharp
pictures. The higher the value, the better the camera’s light sensitivity and
ability to shoot with a fast shutter speed and in low light conditions.
However, high sensitivity introduces noise into the resulting picture, which
may give it a grainy appearance.
Selected picture.
ee
GO
OK
BACK
MENU
S
Press 43 to scroll through the pictures.
Pictures with a R mark are erased.
Press e to mark the pictures to be erased.
4
d4341_e_0000_7.book Page 22 Tuesday, February 20, 2007 4:28 PM