Filter
Top Products
68
Getting to know your camera better
5
If the played back picture is blurred, press the h/P button and the o button
in this order to stabilize the picture.
Icon
No icon: The image cannot be stabilized.
: The image has already been stabilized or has no blur.
: The image can be stabilized. (In some images,
the proper stabilization effect may not be
acquired.)
* It may take long time to display the Icon.
Some images cannot be stabilized or cannot acquire the proper stabilization
effect even if the h/P button is pressed.
The shutter speed is low / the digital image is severely shaken: The recorded
picture may not be stabilized or cannot acquire the proper stabilization effect.
Moving object: The image cannot acquire the proper stabilization effect.
In addition, the digital image stabilization mode cannot be activated when:
• the USB cable is connected to the camera,
• the internal memory capacity or the card capacity is insufficient, or
• the image edited by the movie or the PC, or the image shot by the camera
other than this camera is selected.
• Depending on the picture, the red-eye may not be fixed. Also, parts except the
eye may be fixed.
• Up to 100 pictures can be registered in each album.
• The same picture cannot be registered in several albums.
Playback help and troubleshooting tips
To stabilize the blurred picture
The blurred image cannot be stabilized
The red-eye cannot be fixed
The picture cannot be registered in the album