Filter
Top Products
16
1
Loading the batteries
Getting started
3 Insert the batteries, making sure that they are correctly
oriented as shown in the illustration.
4 Close the battery compartment
cover, and press it down
and slide it in the direction
shown .
• If the battery compartment cover
seems hard to close, do not force it.
With the battery compartment cover
shut, press the mark firmly and
push in the direction shown in the
illustration.
• If the camera is left for about 30 minutes with the batteries removed, the
date and time settings will revert to the factory default settings.
When using AA (R6) batteries
When using a CR-V3 lithium
battery pack
Battery insertion
direction mark
When using a CR-V3 lithium
battery pack, Insert it in the
direction as shown in the
illustration.
There is a mark showing the
correct way to insert the AA
batteries on the bottom of the
camera.
Note
The amount of power consumed varies considerably depending on the
operations performed on the digital camera. If you use exhausted
batteries or alkaline batteries, the camera may turn off without displaying
the battery level warning (P.12).
Precautions when using batteries