Filter
Top Products
En 21
En
J
TAKING CLOSE-UP PICTURES (MACRO MODE)
The macro mode allows you to shoot a subject at a distance of 0.2 - 0.5 m/
0.7 - 1.6 ft.
1
Open the lens barrier.
The camera turns on in the shooting mode.
2
Press .
The monitor turns on and the current macro setting is displayed.
3
Press while the current macro setting is displayed.
The setting changes between ON and OFF each time is
pressed. When the macro mode is selected, the macro mode indicator
is displayed.
4
Take the picture while observing your subject on the monitor.
To cancel macro mode, press repeatedly until OFF appears.
The macro mode indicator disappears.
J USING THE FLASH
1
Open the lens barrier.
The camera turns on in the shooting mode.
2
Press .
The current flash setting is displayed.
3
Press while the current flash setting is displayed.
Each time you press , the flash mode is switched in the following
sequence: AUTO - - - - - .
4
Take the picture.
Auto-flash (No indication)
The flash fires automatically in low light or backlight conditions.
Red-eye reduction flash ( )
The red-eye reduction flash mode reduces this phenomenon by emitting pre-
flashes before firing the regular flash.
Fill-in flash ( )
The flash always fires every time the shutter button is released.
The flash working range is approximately 2.5 m/8.2 ft.
basic_e_d.fm Page 21 Tuesday, February 12, 2002 4:29 PM