Olympus E-30 Camcorder User Manual


  Open as PDF
of 2
 
USING MULTIPLE EXPOSURE
2
Overlay
Select any RAW picture to serve as the base onto which the rest of the picture(s) will be exposed.
When [OVERLAY] is set to [ON], a previously recorded RAW image can be overlaid with multiple
exposures and stored as a separate image.
IMAGE OVERLAY / MULTIPLE EXPOSURE EDIT
In playback mode, up to 4 frames of RAW images can be overlaid and saved as a single image.
• Combine any RAW pictures already stored on the media card
• Manually control the brightness (transparency) of each picture
1. MENU [ ] [EDIT] [IMAGE OVERLAY]
2. Select the number of frames to overlay and press the button.
3. Use to select a frame and press the button.
Repeatedly select images equal to the number of frames selected in Step 2.
To cancel your selection, press the button again.
4. Use to select an image then use to select the Gain for each image. Press the
button.
The Gain can be adjusted from 0.1 to 2.0.
The displayed image changes as the Gain is adjusted.
5. Use to select [YES], then press the button.
Multiple Exposure: “Tips”
• Multiple Exposure on the E-30 works like multiple exposures on film; each successive picture increases the
exposure of the final picture.
• Changing the exposure of each picture gives you control over the transparency of that picture.
o Setting Auto Gain to ON allows the camera to automatically balance the exposure of each image.
o Set Auto Gain to OFF to manually fine-tune the exposure for each image. Dark areas in an image will allow
more of the other images to show through.
o Light areas will mask other images.
• The most effective way to add one subject into another is to shoot at lease one of the subjects on a black
background.
 previous